NMR studies on a palladium(II) complex containing an incompletely coordinated facultative pentadentate Schiff base ligand

Palladium(II) dichloride reacts with 1,10‐bis(2‐pyrrolyl)‐2,5,9‐triaza‐1,9‐decadiene to give a [Pd(C₁₅H₂₀N₅)]Cl complex in which the ligand is four‐coordinated, leaving one pyrrole group dangling. By using COSY, gHSQC, gHMBC connectivities and NOE experiments it has been concluded that one linkage isomer exists in DMSO solution, in spite of the fact that different sets of N atoms of potentially pentadentate ligand might be involved in coordination, and that the three chelate rings in the complex cation are arranged in a sequence: five‐membered, six‐membered, five‐membered which is different from that (5–5–6) found by x‐ray studies on the related [Ni(C₁₅H₂₀N₅)]Cl compound. NMR studies allowed an unambiguous assignment of all ¹H and ¹³C NMR resonances for the complex. Results of x‐ray structural analysis of [Pd(C₁₅H₂₀N₅)](CH₃COO)H₂O supported the five‐membered, six‐membered, five‐membered ring sequence in the [Pd(C₁₅H₂₀N₅)]⁺ complex cation and show an E (trans) orientation of the dangling pyrrole group with respect to the metal center. Copyright © 2002 John Wiley & Sons, Ltd.     

Ca(NO3)2•4H2O-catalysed Biginelli Reaction: One-pot Synthesis of 1,2,3,4-Tetrahydropyrimidin-2-ones/pyrimidine-2-thiones under Solvent-free Conditions

The synthesis of 1,2,3,4-dihydropyrimidinone/thione derivatives was achieved in good to excellent yields using calcium(II) nitrate as catalyst to promote the Biginelli three-component condensation reaction from a diversity of aromatic aldehydes, β-keto compounds and urea or thiourea. The reaction was carried out under solvent-free conditions.     

Fatigue Loading and Life Prediction in Three Fretting Fatigue Fixtures

Three fixtures for conducting laboratory fretting fatigue tests are described and their respective testing methods and the results of the analysis are compared. Each of these fixtures has been used to investigate the effects of various parameters of interest in fretting fatigue. These fixtures include a unique apparatus in which all load applied to the specimen is transferred to the fretting pads, an apparatus similar to many found in the literature where partial load transfer occurs across the pads, and a simplified dovetail fixture in which the clamping load, P, and the shear load, Q, are varied in phase. Select test conditions from prior experiments performed on identical material and resulting in similar lives ranging from one to ten million cycles from these fixtures are identified. The various testing conditions were used to compute the unique stress field for each case. The resulting contact stresses were used to calculate crack initiation based criteria, and to calculate stress intensity factors. The three fixtures were shown to be able to accommodate a range of loads, fretting pad contours, and specimen geometries that produced a variety of stress fields. A crack-initiation-based criterion was shown to predict the failure lives of thinner specimens accurately. The stress intensity factor calculations showed the possibility of a crack arresting for a stress field that decays rapidly and the possibility of a local minimum for K as a function of depth. The fixtures are shown to be complementary in generating data for development of robust fretting fatigue models that use these criteria.     

Studies on the blends of cardanol-based epoxidized novolac resin and CTPB

Cardanol-based novolac-type phenolic resins were synthesized with different mole ratios of cardanol-to-formaldehyde, viz., 1:0.6, 1:0.7, and 1:0.8. These novolac resins were epoxidized with molar excess of epichlorohydrin at 120 °C in basic medium. The epoxidized novolac resins were, separately, blended with different weight ratios of carboxyl-terminated polybutadiene liquid rubber ranging between 0-25 wt% with an interval of 5 wt%. All the blends were cured at 150 °C with 40 wt% polyamide. The formation of various products during the curing of blend samples has been studied by Fourier-transform infra-red spectroscopic analysis. The tensile strength and elongation-at-break of the cured samples increased up to 15 wt% in the blend and decreased thereafter. This blend sample was also found to be most thermally stable system. The blend morphology, studied by scanning electron microscopy analysis, was finally correlated with the structural and property changes in the blends.     

Hydrophilic segmented block copolymers based on poly(ethylene oxide) and monodisperse amide segments

Segmented block copolymers based on poly(ethylene oxide) (PEO) flexible segments and monodisperse crystallizable bisester tetra‐amide segments were made via a polycondensation reaction. The molecular weight of the PEO segments varied from 600 to 4600 g/mol and a bisester tetra‐amide segment (T6T6T) based on dimethyl terephthalate (T) and hexamethylenediamine (6) was used. The resulting copolymers were melt‐processable and transparent. The crystallinity of the copolymers was investigated by differential scanning calorimetry (DSC) and Fourier Transform infrared (FTIR). The thermal properties were studied by DSC, temperature modulated synchrotron small angle X‐ray scattering (SAXS), and dynamic mechanical analysis (DMA). The elastic properties were evaluated by compression set (CS) test. The crystallinity of the T6T6T segments in the copolymers was high (>84%) and the crystallization fast due to the use of monodisperse tetra‐amide segments. DMA experiments showed that the materials had a low T_g, a broad and almost temperature independent rubbery plateau and a sharp flow temperature. With increasing PEO length both the PEO melting temperature and the PEO crystallinity increased. When the PEO segment length was longer than 2000 g/mol the PEO melting temperature was above room temperature and this resulted in a higher modulus and in higher compression set values at room temperature. The properties of PEO‐T6T6T copolymers were compared with similar poly(propylene oxide) and poly(tetramethylene oxide) copolymers. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4522–4535, 2007     

Synthesis and characterization of 6‐ and 12‐arm star polymers by nitroxide‐mediated radical polymerization of St and MA from dendritic TIPNO‐based hexafunctional and dodecafunctional macroinitiators

Dendritic multifunctional macroinitiators having six and 12 TIPNO‐based alkoxyamines, TIPNO‐6 and TIPNO‐12 , were synthesized and used in the living radical polymerization of styrene (St), methyl acrylate (MA), N,N‐dimethylacrylamide (DMAAm), and isoprene (IP). The polymerizations of St initiated with TIPNO‐6 gave 6‐arm star polymers with narrow polydispersities of 1.14–1.18. In the polymerizations of MA initiated with TIPNO‐6 and TIPNO‐12 , the influences of added TIPNO on the polydispersity indexes (PDIs) of the resulting star polymers were first investigated, and this led to the successful formation of poly(MA) star polymers with narrow polydispersities (1.10–1.18). Moreover, the polymerizations of DMAAm and IP from TIPNO‐6 in the presence or absence of TIPNO were briefly investigated. The benzyl ether bonds of the poly(St) and poly(MA) star polymers were cleaved by treating with Me₃SiI or Pd/C, and the resulting arm's parts were analyzed with SEC. The PDIs of the resulting arm parts were low (1.19–1.23), and the M_ns agreed with the M_n,theor, indicating that the poly(St) and poly(MA) star polymers had well‐controlled arms. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 4364–4376, 2007     

齐次~Morrey-Herz 空间上分数次积分算子高阶交换子的有界性

在齐次Morrey-Herz空间上建立了高阶交换子~$T^{m}_{b,l}$ 和 ~$M^{m}_{b,l}$的有界性，其中~$T^{m}_{b,l}$ 和 ~$M^{m}_{b,l}$ 是由分数次积分算子和分数次极大算子分别与~BMO($R^{n}$)函数生成的高阶交换子.     

Reactions of 1-alkynylphosphonates with group (IV) complexes

This article describes our recent methods for the synthesis of substituted vinylphosphonates by reacting 1-alkynylphosphnates with group (IV) complexes. cis-Vinylphosphonates, 1,3-butadienylphosphonates, 1-(hydroxymethyl)vinylphosphonates, 2-(hydroxymethyl)vinylphosphonates, (E) 3-oxo-1-alkenylphosphonates were produced as a result of the reactions between zirconium complexes and 1-alkynylphosphonates. On the other hand, titanium complexes afford 3-aminovinylphoshonates, 1,4-bis-phosphonates, and various other di- and tri-substituted vinylphosphonates. An evaluation of access of these recently synthesized vinylphosphonates as MMP-2 inhibitors has shown that certain compounds are very potent and promising.     

Voltammetric determination of mesotrione at hanging mercury drop electrode

A study of the electrochemical reduction of the mesotrione pesticide on a hanging mercury drop electrode (HMDE) was performed as a basis for the development of a sensitive analytical method for natural samples. The electrochemical characteristics of herbicide mesotrione dissolved in a phosphate buffer (pH 7.0) have been determined by means of electrochemical techniques such as cyclic voltammetry (CV) and differential pulse voltammetry (DPV) over a wide range of pH from 2.0 to 10.0. The experimental parameters, such as electrolyte type and its pH, pulse amplitude, and scan rate were optimized. The method was applied to the determination of the pesticide in a spiked soil samples. Using this method, a linear calibration curve for mesotrione was obtained up to the 0.1 μM range in pH 7 phosphate buffer solution with a detection limit (S/N = 3) of 50 nM. The method can be applied successfully to the determination of mesotrione in soils. The text was submitted by the authors in English.